Viper Multi 195 Bundle Unimig PK11107

DESCRIPTION:

The VIPER MULTI 195 MAX is now out, the latest addition to our VIPER range. This 3-in-1 machine has been packed full of features so it can do just about everything, MIG, DC TIG, and STICK, and all on a 10A plug. It comes loaded with complete, comprehensive synergic MIG and TIG programs, so setting up for your welds has never been quicker or easier. 

FEATURES:

Machine Features

• 10A Plug: Plug in and play. The 10A power plug can be used on any domestic outlet, so it’s perfect for the DIY home handyman or the professional welder looking to take it anywhere.
• Smart Fan: The Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimizes the number of contaminants being pulled through the machine.
• 4.0” Colour LCD Screen: The intuitive screen controls and next-generation user interface make changing your settings easier than ever.
• Power Factor Correction (PFC): Get the most out of your machine. The PFC maximizes the electrical efficiency of the machine and automatically compensates for any voltage fluctuations, so you get more output power and the internal components last longer. 
• IP21 Rating: Rated IP21, so it’s protected from touch by fingers and objects greater than 12mm, and water spray from a vertical direction. 
• Dual Gas Input: Fitted with separate MIG and TIG gas inputs, allowing you to switch processes quicker than ever before.
• Job Memory: The job memory function allows you to enter and store weld parameter settings under job numbers. Weld parameters can be further adjusted and stored as required. A total of 20 jobs can be memorized and stored for recall.
• Foot Control Ready: This machine supports the connection of both a wired or wireless foot control for extra versatility and convenience while welding. You can adjust your amperage hands-free to avoid disrupting your torch movement, and the wireless option reduces cables and adds greater maneuverability.

MIG Features

• MIG Smart-Set™: Setting up for a weld has never been easier, just set your joint type, filler wire, gas mixture, wire diameter, and material thickness and you’re ready to weld!
• Complete MIG Weld Cycle Control: Get complete control over your MIG welds with a full set of adjustable parameters, such as pre-and post-gas flow, arc ignition speed, and burn back. 
• Gas-shielded & Gasless Wires: Capable of running both gas-shielded and gasless MIG wire, you can tackle a wide variety of welding projects with ease. Whether you're working with mild steel, stainless steel, aluminum, or flux-cored wire, our machine has got you covered.
• Spool Gun Ready: Make welding aluminum even easier. No need to change your existing setup. The spool gun lets you quickly switch over and get any job done with no downtime. 
• Crater Fill: End your welds as strong as they started. The Arc End feature ramps your welding current and voltage down at the end of a weld, filling it in at a lower amperage, and eliminating craters and pinholes.
• Inductance Control: Change the frequency of your short circuit MIG welds with the Inductance settings, so you can choose your preferred arc characteristics.
• Digital Geared Wire Drive: Experience unparalleled accuracy with our all-new Digital Geared Wire Drive system. Designed to sustain a consistent arc in varying conditions and with different wire types, it ensures an accurate wire feed speed. With this system, achieving precision in every welding task is effortless.
• Arc Start: Get the smoothest arc starts possible with the Arc Start dual function. Set above 100% and the Hot Start gives you a boost in current at the start of your weld, eliminating issues with starting on cold metal, and making welding on thicker materials easier. Set below 100% and Soft Start helps with edge arc ignition by starting at a lower current and ramping up when welding away from the edge.

TIG Features

• TIG Smart-Set™: The easiest way to set up a TIG weld, is simply to set your material, joint type, tungsten diameter, plate thickness, and gas mixture and you’re good to go!
• Pulse TIG: Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.
• DC High-Frequency TIG: Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre-and post-gas and up-and-down slope parameters. 
• Heat Control Trigger (HCT) Mode: Heat Control Trigger Mode lets you set a base current, which you can switch to at any time during a weld by pressing the trigger button. Heat Control Trigger Mode is great for manual heat input control as you go.

MMA Features

• VOLTAGE REDUCTION DEVICE (VRD): Reduces Open Circuit Voltage (OCV), protecting yourself and the machine.
• ARC FORCE: Arc Force helps to keep the arc stabilized throughout the weld, by detecting any short circuits and increasing the peak current to prevent the arc cutting out or electrode sticking.
• HOT START: Hot Start increases the stability of your arc ignition, and prevents a lack of fusion at the start of the weld.
• ANTI STICK: Anti-stick prevents your electrode from sticking to your workpiece. When the machine detects sticking, the current will shut off and unstick the electrode.

• PULSE MMA (STICK): Pulse MMA (STICK) welding helps reduce spatter, improves heat control, and allows for easier removal of slag. It also improves the speed and efficiency of vertical up welds by eliminating the use of the “Christmas Tree” technique, while still maintaining root fusion.

SPECIFICATIONS:

• PRIMARY INPUT VOLTAGE: 240V Single Phase
• SUPPLY PLUG: 10 AMP
• Ieff (A): 8.9
• RATED OUTPUT: 25A/15V - 195A/23.8V
• NO LOAD VOLTAGE (V): 67
• PROTECTION CLASS: IP21
• INSULATION CLASS: H
• MINIMUM GENERATOR (kVA): 8.5
• DINSE CONNECTOR: 35/50
• STANDARD: AS/NZS 60974.1
• WELDS: MIG: Mild Steel, Stainless Steel, Aluminium, Silicon Bronze 
• TIG: Mild Steel, Stainless Steel, Copper, Silicon Bronze 
• MMA: Mild Steel, Stainless Steel, Cast Iron
• WARRANTY (Years): 3

• MIG WELDING CURRENT RANGE: 25-195A
• MIG DUTY CYCLE @ 40°C: 15% @ 195A 
• 60% @ 98A 
• 100% @ 76A
• MIG WIRE SPOOL SIZE: 1kg / 5kg
• MIG WELDING THICKNESS RANGE: 1-8mm
• DRIVE ROLLER SIZE: 30/22

• TIG FUNCTION TYPE: DC High-Frequency
• TIG WELDING CURRENT RANGE: 5-195A
• TIG DUTY CYCLE @ 40°C: 30% @ 195A 
• 60% @ 138A 
• 100% @ 107A
• TIG WELDING THICKNESS RANGE: 1-8mm

• STICK WELDING CURRENT RANGE: 5-195A
• STICK DUTY CYCLE @ 40°C: 15% @ 195A 
• 60% @ 98A 
• 100% @ 76A
• STICK ELECTRODE RANGE: 2.5-4.0mm
• STICK WELDING THICKNESS RANGE: 2-10mm
• DIMENSIONS (mm): 470×190×350mm
• WEIGHT (kg): 11.8mm
• WIRE DRIVE: Geared
• VRD: Yes
• SPOOL GUN CONNECTION: Yes
• FOOT CONTROL CONNECTION: Yes
• BURNBACK ADJUSTMENT: Yes
• WIRE INCH: Yes
• THERMAL OVERLOAD PROTECTION: Yes

BUNDLE CONTENTS:
Viper multi 195 max welders.
Welding helmet trade series black.
ER70S-6 mild steel wire 0.8mm 5kg.
A consumable starter kit suits M15.
Rouge heavy-duty welding gloves.

Part Number/SKU: PK11107

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.