Stencil Cleaner 20L

DESCRIPTION:

Chemtools® Screen Kleen M Stencil Cleaner is an effective and economical solvent blend, formulated to be completely compatible with all commonly used solder pastes. It offers a fast evaporation rate and dries without leaving any residue.
Unlike other hand-applied stencil cleaners, Screen Kleen M helps to reduce solder paste dry-out while enhancing its release from even the finest apertures. This extends the on-screen life of the solder paste, allowing for a greater number of prints between cleaning.
Screen Kleen M is chlorine-free and free of halogenated solvents. Its use will reduce the risk of print defects, such as smears and bridging, without interfering with the soldering process.

DIRECTIONS (READ LABEL BEFORE USE):

  • Pour or spray a small amount of Stencil Cleaner onto a lint-free cloth, or rag. Do not directly pour over the stencil. Do not dilute.
  • Wipe only the underside areas of the stencil to be cleaned.
  • Blot away any excess and allow to dry.

TECHNICAL DATA:

LIQUID PROPERTIES:

  • Density @ 20oC (ASTM D4052):  0.785 Kg/L
  • Relative Evaporation Rate (ASTM D3539):  1.5 (nBuAc = 1)
  • Flash Point:  12oC (IP 170)
  • Auto-Ignition Temperature (ASTM E659):  425oC
  • Explosion Limit (Lower % v/v):  2
  • Explosion Limit (Upper % v/v):  12

FIRST AID AND SAFETY PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons who will work with the material.

STORAGE:

Keep out of reach of children. Store in a sealed container in a cool, dry place (between 8°C - 27°C). Do not return any unused material to its original container.
Containers must be secured and stored upright during transit.


Part Number/SKU: CT-SKM-20L

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU CT-SKM-20L
Barcode # 9342114013820
Brand Chemtools
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Stencil Cleaner 20L

DESCRIPTION:

Chemtools® Screen Kleen M Stencil Cleaner is an effective and economical solvent blend, formulated to be completely compatible with all commonly used solder pastes. It offers a fast evaporation rate and dries without leaving any residue.
Unlike other hand-applied stencil cleaners, Screen Kleen M helps to reduce solder paste dry-out while enhancing its release from even the finest apertures. This extends the on-screen life of the solder paste, allowing for a greater number of prints between cleaning.
Screen Kleen M is chlorine-free and free of halogenated solvents. Its use will reduce the risk of print defects, such as smears and bridging, without interfering with the soldering process.

DIRECTIONS (READ LABEL BEFORE USE):

  • Pour or spray a small amount of Stencil Cleaner onto a lint-free cloth, or rag. Do not directly pour over the stencil. Do not dilute.
  • Wipe only the underside areas of the stencil to be cleaned.
  • Blot away any excess and allow to dry.

TECHNICAL DATA:

LIQUID PROPERTIES:

  • Density @ 20oC (ASTM D4052):  0.785 Kg/L
  • Relative Evaporation Rate (ASTM D3539):  1.5 (nBuAc = 1)
  • Flash Point:  12oC (IP 170)
  • Auto-Ignition Temperature (ASTM E659):  425oC
  • Explosion Limit (Lower % v/v):  2
  • Explosion Limit (Upper % v/v):  12

FIRST AID AND SAFETY PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons who will work with the material.

STORAGE:

Keep out of reach of children. Store in a sealed container in a cool, dry place (between 8°C - 27°C). Do not return any unused material to its original container.
Containers must be secured and stored upright during transit.

SKU CT-SKM-20L
Barcode # 9342114013820
Brand Chemtools
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


R88 Rust Protector 20L

R88 Rust Protector 20L

Part No: CT-R88-20L

$620.30
R88 Rust Protector 5L

R88 Rust Protector 5L

Part No: CT-R88-5L

$171.80

More From This Category