GalMax ZPH Grey Oxide Metal Primer ChemTools CT-GYP-4L

DESCRIPTION:

GalMax™ ZPH Grey Oxide Metal Primer is a high-quality oil-based rust-resistant primer, ideal for use on non-galvanised, ferrous metals, such as iron and steel. Its corrosion-resistant colored oxide pigments protect surfaces from exposure to chemical fumes and extreme environmental conditions, such as excessive heat, humidity, rain, and wind.
ZPH is quick-drying and designed to provide a tough, durable, and smooth base coat that can be used directly over rusty surfaces. It is ideal for interior and exterior use and can be over-coated with most conventional top coats. GalMax™ ZPH also offers extreme weather corrosion protection for farm equipment, fences, structural steel, pipes, field machinery, and storage tanks, and when applied as a base coat over rusty surfaces, will inhibit the spread of any further corrosion.

APPLICATION:

Ensure the surface is clean, dry, and free of contaminants, removing all scale and rust as far as possible before application. Do not use acidic rust converters or removers. Do not paint over loose or unsound surfaces.
Drying times are temperature-dependent.
Aerosol: Invert the can and shake well for at least one minute. Shake often during use. Hold the can upright and angle the fan jet for a horizontal or vertical pattern. Apply in even sweeping strokes approximately 250mm to 300mm from the surface. Apply several light coats a few minutes apart rather than one heavy coat. After spraying, invert the can and press the nozzle to clear the jet. If blocked, use fuse wire and mineral turps to clean the nozzle.
Bulk Liquid: Before use, stir contents thoroughly for 5 minutes using a flat stirrer with a circular, lifting motion. Stir occasionally during use. Apply 2 coats for optimum protection by brush, roller, or spray equipment.

Do not paint at temperatures below 15o C or above 40o C. Avoid high humidity.

TECHNICAL DATA:

Specifications

• Colour:  Matt Grey
• Paint Type:  Zinc Phosphate Primer

Application Conditions

• Temperature: 15oC to 40oC
• Humidity:  85% RH Max
• Recommended Film Thickness:  40μm (1.6 thou)

Drying and Coating

• Touch Dry* Approx.:  10 minutes
• Re-Coat/Top Coat* Approx.: 1 hour
• Top Coat Required:  Yes
• Re-Coat with Water-Based Paints:  Yes
• Re-Coat with Solvent-Based Paints:  Yes

*Times are dependent upon temperature and weather conditions

Coverage
Aerosol:  2.5m2 per 400g can
Brush:  14m2 per litre

Compatibility/Suitability

FIRST AID & SAFETY:

Always refer to the Safety Data Sheet/s before use. Use proper Personal Protection Equipment. Do not get in the eyes, on skin, or clothing. Use with adequate ventilation. Avoid breathing fumes. Keep away from heat, sparks, open flames, and hot surfaces. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations stated in the Safety Data Sheet/s for this product have been fully understood by all persons working with the material.

Part Number/SKU: CT-GYP-4L

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.