GalMax NPR Red Galvanising Paint 400g Aerosol ChemTools CT-RSG-400

DESCRIPTION:

GalMax™ NPR Coloured Galvanising Paint provides direct-to-metal corrosion protection, with or without primer, and dries to a smooth and durable rust-fighting finish. It can be used extensively in the maintenance and restoration of damaged or worn galvanized metal and for corrosion protection of steel and iron structures or equipment.
GalMax™ NPR offers excellent adhesion to most metals and can be used on concrete and ceramics, as well as other interior and exterior surfaces. Common uses include radiators and industrial mufflers, roads and bridges, fences, pipes, metal roofs, and offshore rigs.
Note: For long-term and added protection on fresh welds or in coastal environments, priming the surface with any GalMax™ Cold Galvanising Paint or Zinc Oxide Primer is recommended before application.

APPLICATION:

Ensure the surface is clean, dry, and free of contaminants, removing all scale and rust as far as possible before application. Do not use acidic rust converters or removers. Do not paint over loose or unsound surfaces.
Drying times are temperature-dependent.
Aerosol: Invert the can and shake well for at least one minute. Shake often during use. Hold the can upright and angle the fan jet for a horizontal or vertical pattern. Apply in even sweeping strokes approximately 250mm to 300mm from the surface. Apply several light coats a few minutes apart rather than one heavy coat. After spraying, invert the can and press the nozzle to clear the jet. If blocked, use fuse wire and mineral turps to clean the nozzle.
Bulk Liquid: Before use, stir contents thoroughly for 5 minutes using a flat stirrer with a circular, lifting motion. Stir occasionally during use. Apply 2 coats for optimum protection by brush, roller, or spray equipment. 

TECHNICAL DATA:

APPLICATION CONDITIONS:

• Temperature:  15oC to 40oC
• Humidity;  85% RH Max
• Recommended Film Thickness:   40μm (1.6 thou)

DRYING AND COATING:

• Touch Dry*:   5 to 10 minutes
• Re-Coat*:   Approx. 2 hours
• Top Coat Required;   No
• Re-Coat with Water-Based Paints:  Yes, but not recommended
• Re-Coat with Solvent-Based Paints:  Yes
• Heat Resistance Once Dry:  Up to 100oC

*Times are dependent upon temperature and weather conditions

COVERAGE:

• Aerosol:  2m2 per 400g can
• Brush:  14m2 per litre

COMPATIBILITY/SUITABILITY:

FIRST AID AND SAFETY PRECAUTIONS:

Always refer to the Safety Data Sheet/s before use. Use proper Personal Protection Equipment. Do not get in the eyes, on skin, or clothing. Use with adequate ventilation. Avoid breathing fumes. Keep away from heat, sparks, open flames, and hot surfaces. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet/s for this product have been fully understood by all persons who will work with the material.

STORAGE AND TRANSPORT:

Refer to Safety Data Sheet/s for recommendations. As a general precaution, keep containers tightly closed, protect them from sunlight, and do not expose them to temperatures exceeding 50°C. Containers should be secured and stored upright during transit.

Part Number/SKU: CT-RSG-400

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.