Cyanoacrylate Activator Acetone Based 150g

DESCRIPTION:

Acetone-Based Activator for Metals & Non-Sensitive Substrates
Chemtools® Rapidstick™ Cyanoacrylate Adhesives Accelerator speeds the rate of cure of cyanoacrylate adhesives, and guarantees proper cohesion, preventing absorption into porous substrates. It is highly recommended for thick bond lines (>20mm), and for use in low temperatures, or in conditions of low air moisture.

DIRECTIONS (READ LABEL BEFORE USE):

Pre-Bond Application: Before use, remove all contaminants from surfaces requiring bonding. From a distance of 250mm, apply one coat and allow it to completely dry (approx. 25 seconds). Apply the cyanoacrylate adhesive immediately thereafter, or not more than 45 seconds later.
Post-Bond Application: From a distance of 250mm from the surface, spray one coat directly over the pre-applied cyanoacrylate adhesive.
Re-Application Pre- and Post-Bond: Can be re-applied following a delay of more than 45 seconds from the previous application.

TECHNICAL DATA:

LIQUID PROPERTIES:

• Composition:  Organic activator
• Appearance:  Clear amber liquid
• Viscosity @ 20°C:  1 cps
• Drying Time @ 20°C:  < 25 seconds
• Drying Time on Part Life:  1 minute

FIRST AID AND SAFETY PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Do not get in the eyes, on the skin, or clothing. This product may produce adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons who will work with the material.

STORAGE:

Keep out of reach of children. Store below 30°C. Protect from direct sunlight. Do not expose to temperatures exceeding 50°C. Containers must be secured and stored upright during transit

PREVIOUS PART N0: 8-1155-150

Part Number/SKU: 8-1155-150

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.