Corrofix Rust Converter 1L ChemTools CT-RC-1L

DESCRIPTION:

Chemtools® CorrofixTM Rust Converter is a mildly acidic solution used to chemically turn rusty metal into an impervious black iron to limit further corrosion. It effortlessly converts rust into a usable waterproof metal surface, providing a long-lasting barrier.
Rust Converter dramatically increases life expectancy when used before priming, painting, or coating, and promotes adhesion for further paint applications. It is soluble in water and can be brushed or sprayed onto damp surfaces.
Rust Converter can be used on galvanized surfaces, rusted nuts and bolts, automotive panels, hand tools, and more.

DIRECTIONS FOR USE:

  • Before application, ensure the surface is free of scaly rust and loose or flaking paint. Surfaces may be cleaned with a wire brush or scraper.
  • Apply liberally, undiluted, directly to the rust by brush or spray.
  • Continue brushing the surface as the acid dries to distribute the solution evenly, and to introduce oxygen. This will produce an even color.
  • Inspect the surface after 15 - 30 minutes to ensure that all rust is converted, and has a black appearance. If any areas require further treatment, reapply as necessary.
  • In hot conditions, clean water may be applied before the treatment, to cool the surface and assist in penetration.
  • These steps may be repeated until a coating of the desired density and color is achieved. 

TECHNICAL DATA:

  • Appearance:  Colourless liquid
  • Specific Gravity:  1.2g/cm3
  • Water Solubility:  Completely soluble
  • pH Level: Approx. 3
  • Flammability:  Non-Flammable
  • Surface Temperature Range:  5°C to 30°C
  • Coverage (@ 30°C):  Approximately 8 square meters per Litre

FIRST AID & SAFETY PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product is capable of producing adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons working with the material.

STORAGE:

Keep out of reach of children. Keep the container tightly closed. Protect from sunlight. Store in a dry place between 5°C and 40°C. Containers must be secured and stored upright during transit.


Part Number/SKU: CT-RC-1L

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU CT-RC-1L
Barcode # 9342114004842
Brand Chemtools
Shipping Weight 1.1000kg
Shipping Width 0.150m
Shipping Height 0.150m
Shipping Length 0.150m
Shipping Cubic 0.003375000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Corrofix Rust Converter 1L ChemTools CT-RC-1L

DESCRIPTION:

Chemtools® CorrofixTM Rust Converter is a mildly acidic solution used to chemically turn rusty metal into an impervious black iron to limit further corrosion. It effortlessly converts rust into a usable waterproof metal surface, providing a long-lasting barrier.
Rust Converter dramatically increases life expectancy when used before priming, painting, or coating, and promotes adhesion for further paint applications. It is soluble in water and can be brushed or sprayed onto damp surfaces.
Rust Converter can be used on galvanized surfaces, rusted nuts and bolts, automotive panels, hand tools, and more.

DIRECTIONS FOR USE:

  • Before application, ensure the surface is free of scaly rust and loose or flaking paint. Surfaces may be cleaned with a wire brush or scraper.
  • Apply liberally, undiluted, directly to the rust by brush or spray.
  • Continue brushing the surface as the acid dries to distribute the solution evenly, and to introduce oxygen. This will produce an even color.
  • Inspect the surface after 15 - 30 minutes to ensure that all rust is converted, and has a black appearance. If any areas require further treatment, reapply as necessary.
  • In hot conditions, clean water may be applied before the treatment, to cool the surface and assist in penetration.
  • These steps may be repeated until a coating of the desired density and color is achieved. 

TECHNICAL DATA:

  • Appearance:  Colourless liquid
  • Specific Gravity:  1.2g/cm3
  • Water Solubility:  Completely soluble
  • pH Level: Approx. 3
  • Flammability:  Non-Flammable
  • Surface Temperature Range:  5°C to 30°C
  • Coverage (@ 30°C):  Approximately 8 square meters per Litre

FIRST AID & SAFETY PRECAUTIONS:

Please refer to the Safety Data Sheet (SDS) before use. Use with adequate ventilation and avoid breathing fumes. Avoid contact with eyes and skin. This product is capable of producing adverse health conditions, ranging from minor skin irritation to serious systemic effects. It should not be used, stored, or transported until the handling precautions and recommendations stated in the Safety Data Sheet (SDS) for this product have been fully understood by all persons working with the material.

STORAGE:

Keep out of reach of children. Keep the container tightly closed. Protect from sunlight. Store in a dry place between 5°C and 40°C. Containers must be secured and stored upright during transit.

SKU CT-RC-1L
Barcode # 9342114004842
Brand Chemtools
Shipping Weight 1.1000kg
Shipping Width 0.150m
Shipping Height 0.150m
Shipping Length 0.150m
Shipping Cubic 0.003375000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review