Capacitor Discharge Stud Welder CD1000

Designed specifically for the insulation industry

The CD1000 is designed specifically for the insulation industry. The Pin Welders robust and reliable design has performed efficiently and reliably for many years under the stress of on-site and workshop conditions.

The unique chuck guard design has the following advantages:
1. No adjustment necessary for different length pins.
2. Protects chuck from zinc splashing during welding, therefore increasing the life of the chuck.
3. Because of the self-tightening effect between the chuck and the chuck guard, arcing between the chuck and the pin is minimal

Technical Data

STUD SIZE	.105" insulation pin through 5/32 whit or M4 threaded studs
STUD MATERIAL	Mild steel, stainless steel. Zinc, galvanised and copper finished.
WEIGHT	16 kgs
SIZE(L.W.H)	315 mm x 436 mm x 245 mm
WELDING RATE	15 per minute
INPUT POWER	240V A.C.
WELD MODE	Contact
CIRCUIT PROTECTION	Primary fuses Output voltage; circuit breaker operator protection.
CABLE LENGTH	Gun 4.8m (16')
Earth	3.04m (10')

Details

SPEED OF OPERATION	Welding time is less than 0.0002 seconds. Fifteen welds per minute possible.
COST SAVING	Speed of operation and portability cut costs up to 10 times compared with conventional methods, drilling tapping etc. Material saving by virtue of simpler design.
RELIABILITY	Robust construction and solid state components insure long life and dependability in harsh working environment.
NO REVERSE SIDE MARKING	No distortion or burning. Therefore no reworking on the reverse side.
SIMPLE TO OPERATE	Unskilled operators are all that is needed. No flux, ferrules or inert gas required.
SAFE	No arc flash. Fully insulated gun, 14V DC operation. Internal safety circuit to protect operator.

CD1000 Brochure

Part Number/SKU: CD1000

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU	CD1000
Brand	KCD
Shipping Weight	35.0000kg
Shipping Width	0.450m
Shipping Height	0.450m
Shipping Length	0.450m
Shipping Cubic	0.091125000m3
Unit Of Measure	ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

Description

Capacitor Discharge Stud Welder CD1000

STUD SIZE	.105" insulation pin through 5/32 whit or M4 threaded studs
STUD MATERIAL	Mild steel, stainless steel. Zinc, galvanised and copper finished.
WEIGHT	16 kgs
SIZE(L.W.H)	315 mm x 436 mm x 245 mm
WELDING RATE	15 per minute
INPUT POWER	240V A.C.
WELD MODE	Contact
CIRCUIT PROTECTION	Primary fuses Output voltage; circuit breaker operator protection.
CABLE LENGTH	Gun 4.8m (16')
Earth	3.04m (10')

Details

SPEED OF OPERATION	Welding time is less than 0.0002 seconds. Fifteen welds per minute possible.
COST SAVING	Speed of operation and portability cut costs up to 10 times compared with conventional methods, drilling tapping etc. Material saving by virtue of simpler design.
RELIABILITY	Robust construction and solid state components insure long life and dependability in harsh working environment.
NO REVERSE SIDE MARKING	No distortion or burning. Therefore no reworking on the reverse side.
SIMPLE TO OPERATE	Unskilled operators are all that is needed. No flux, ferrules or inert gas required.
SAFE	No arc flash. Fully insulated gun, 14V DC operation. Internal safety circuit to protect operator.

CD1000 Brochure

Attributes

SKU	CD1000
Brand	KCD
Shipping Weight	35.0000kg
Shipping Width	0.450m
Shipping Height	0.450m
Shipping Length	0.450m
Shipping Cubic	0.091125000m3
Unit Of Measure	ea