Australian Thermic Lance Igniter Tube IT400

The LIT (Lance Igniter Tube) process is a safer method of igniting Thermic Lances, which eliminates the use of any fuel gases (eg. Acetylene, LPG) in the area.

  • One Lance Igniter Tube can ignite up to 25 mini Thermic Lances and 20 Large Thermic Lance.
  • Makes Lancing even more portable
  • Safer environment 

How does LIT work?

1. You ignite the Lance Wick with a match. The Wick then smoulders very slowly.
2. You place the Lance over the face of the Igniter Tube and your assistant places the smouldering Wick in the same position.
3. You apply oxygen at low pressure. The Wick flares into flame and lights the Igniter Tube.
4. You remove the Wick and place the Lance 30mm inside the centre of the Igniter Tube.
5. Your assistant can slowly increase oxygen pressure at the Regulator, which causes a fierce flame to heat up end of Lance. This ignites the Lance, as shown in the picture.


Part Number/SKU: IT400

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU IT400
Barcode # IT400
Brand ATLC
Shipping Weight 1.5000kg
Shipping Width 0.100m
Shipping Height 0.150m
Shipping Length 0.500m
Shipping Cubic 0.007500000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


Australian Thermic Lance Igniter Tube IT400

The LIT (Lance Igniter Tube) process is a safer method of igniting Thermic Lances, which eliminates the use of any fuel gases (eg. Acetylene, LPG) in the area.

  • One Lance Igniter Tube can ignite up to 25 mini Thermic Lances and 20 Large Thermic Lance.
  • Makes Lancing even more portable
  • Safer environment 

How does LIT work?

1. You ignite the Lance Wick with a match. The Wick then smoulders very slowly.
2. You place the Lance over the face of the Igniter Tube and your assistant places the smouldering Wick in the same position.
3. You apply oxygen at low pressure. The Wick flares into flame and lights the Igniter Tube.
4. You remove the Wick and place the Lance 30mm inside the centre of the Igniter Tube.
5. Your assistant can slowly increase oxygen pressure at the Regulator, which causes a fierce flame to heat up end of Lance. This ignites the Lance, as shown in the picture.

SKU IT400
Barcode # IT400
Brand ATLC
Shipping Weight 1.5000kg
Shipping Width 0.100m
Shipping Height 0.150m
Shipping Length 0.500m
Shipping Cubic 0.007500000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review