6/12V Battery Charger 4AMP Tridon AEE400

FEATURES:

  • MULTI-STAGE CHARGING PROCESS: The charger uses a Multi-Stage charging process designed to charge and maintain the battery. The charging process includes a Soft Start mode to properly charge deeply discharged batteries, and is beneficial for the long-term health of your batteries. The last procedure in the charging routine is a Maintenance Mode that allows the charger to be connected to a battery and maintain a proper charge level.
  • SMART CLAMP TECHNOLOGY:  The charger will supply power to the output leads only when a correct connection is made.
  • MULTIPLE BATTERY COMPATIBILITY:  The charger will charge different battery types, including Conventional, Maintenance Free, AGM, Gel Cell, LiFePO4, and Deep Cycle batteries.
  • MULTIPLE OUTPUT OPTIONS:  The charger comes complete with DC output clamps and ring terminals to charge or maintain the battery.
  • REVERSE POLARITY PROTECTION:  Reverse Polarity LED will flash, and power will be cut off if the clamps connect reversely.
  • BATTERY FAULT PROTECTION: Conditions that cause the fault include connecting to a battery with a voltage less than 1V, connecting to a battery with a voltage above 16V in 12V mode (8V in 6V mode), connecting to a battery with a shorted cell or if the charger diagnoses an incorrect voltage selection.
  • RECOVERY MODE:  The charger can protect against the interruption of power (power outage). When a power interruption occurs, all LEDs will turn off, except the Battery Type LED, which will blink slowly. After 36 hours, to conserve the charge on the connected battery, all LEDs will turn off. Upon resumption of power, the charger will resume normal operation in the existing settings, and status indicators will again be active. For a limited time after the resumption of power, the CHARGED LED will blink to indicate that Recovery Mode has been activated. If the battery’s voltage is too low (<6V) to support Recovery Mode while charging, the Battery Type LED will flash rapidly to alert the user to this condition. Once the battery’s voltage increases above 6V, Recovery Mode will again be supported, and the Battery Type LED will stop flashing

SPECIFICATIONS:

Battery Type AGM, STD, LITHIUM
Charging Current 4A
Charging Stage 7 Stages
Charging Voltage 6/12v
Charging Voltage - AGM/Lead Acid 14.7v
Charging Voltage - LiFePO 14.4v
Dimensions 172(L) X 89(W) X 45 (H) MM
Input 220-240Vac,50Hz; 110-120Vac, 60Hz
Max Ambient Operating Temp 50 Degrees
Min Start Voltage 0V
Operation Temperature 0-50 degrees
Over Temp Protection Yes
Overload Protection Yes
Part No AEE400
Reverse Polarity Protection Yes
Short Circuit Protection Yes
Weight 0.6 kg

Part Number/SKU: AEE400

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU AEE400
Brand Tridon
Shipping Weight 2.5000kg
Shipping Width 0.350m
Shipping Height 0.200m
Shipping Length 0.350m
Shipping Cubic 0.024500000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review


6/12V Battery Charger 4AMP Tridon AEE400

FEATURES:

  • MULTI-STAGE CHARGING PROCESS: The charger uses a Multi-Stage charging process designed to charge and maintain the battery. The charging process includes a Soft Start mode to properly charge deeply discharged batteries, and is beneficial for the long-term health of your batteries. The last procedure in the charging routine is a Maintenance Mode that allows the charger to be connected to a battery and maintain a proper charge level.
  • SMART CLAMP TECHNOLOGY:  The charger will supply power to the output leads only when a correct connection is made.
  • MULTIPLE BATTERY COMPATIBILITY:  The charger will charge different battery types, including Conventional, Maintenance Free, AGM, Gel Cell, LiFePO4, and Deep Cycle batteries.
  • MULTIPLE OUTPUT OPTIONS:  The charger comes complete with DC output clamps and ring terminals to charge or maintain the battery.
  • REVERSE POLARITY PROTECTION:  Reverse Polarity LED will flash, and power will be cut off if the clamps connect reversely.
  • BATTERY FAULT PROTECTION: Conditions that cause the fault include connecting to a battery with a voltage less than 1V, connecting to a battery with a voltage above 16V in 12V mode (8V in 6V mode), connecting to a battery with a shorted cell or if the charger diagnoses an incorrect voltage selection.
  • RECOVERY MODE:  The charger can protect against the interruption of power (power outage). When a power interruption occurs, all LEDs will turn off, except the Battery Type LED, which will blink slowly. After 36 hours, to conserve the charge on the connected battery, all LEDs will turn off. Upon resumption of power, the charger will resume normal operation in the existing settings, and status indicators will again be active. For a limited time after the resumption of power, the CHARGED LED will blink to indicate that Recovery Mode has been activated. If the battery’s voltage is too low (<6V) to support Recovery Mode while charging, the Battery Type LED will flash rapidly to alert the user to this condition. Once the battery’s voltage increases above 6V, Recovery Mode will again be supported, and the Battery Type LED will stop flashing

SPECIFICATIONS:

Battery Type AGM, STD, LITHIUM
Charging Current 4A
Charging Stage 7 Stages
Charging Voltage 6/12v
Charging Voltage - AGM/Lead Acid 14.7v
Charging Voltage - LiFePO 14.4v
Dimensions 172(L) X 89(W) X 45 (H) MM
Input 220-240Vac,50Hz; 110-120Vac, 60Hz
Max Ambient Operating Temp 50 Degrees
Min Start Voltage 0V
Operation Temperature 0-50 degrees
Over Temp Protection Yes
Overload Protection Yes
Part No AEE400
Reverse Polarity Protection Yes
Short Circuit Protection Yes
Weight 0.6 kg
SKU AEE400
Brand Tridon
Shipping Weight 2.5000kg
Shipping Width 0.350m
Shipping Height 0.200m
Shipping Length 0.350m
Shipping Cubic 0.024500000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other National Welding and Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review