Nozzle Dip / Gel or Tip Dip 400g

Non toxic water based dipping gel for the prevention of weld spatter adherence to MIG torch parts. This silicon free compound is used to prolong the life of nozzles & tips.

1. Ensure the nozzle is clean and free from weld spatter before starting.
2. Replace the worn components before starting.
3. Start to weld briefly to heat the nozzle.
4. When the nozzle is hot-dip it into the Cal-Guard gel.
5. Drain any excess gel off if necessary.
6. Continue to re-dip the nozzle into the gel to maintain an even coat, do this as required.
7. Avoid the build-up of Cal-Guard Nozzle Dip Gel in the diffuser by storing the torch in a downward direction when not in use.

UMND 

800055 

Tip Dip Gel 400G Tin

Part Number/SKU: TIPDIP

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.